Page 1 of 1
Neck profile on a Guild F50
Posted: Thu Apr 27, 2017 3:16 pm
by Doug Shaker
I am making a guitar for a friend and the guitar that he currently uses is a Guild F50R. I'd like to duplicate the neck profile as much as possible, but his guitar is 75 miles North of me. Does anyone know of an on-line resource that might have detailed neck profile measurements?
Re: Neck profile on a Guild F50
Posted: Thu Apr 27, 2017 9:54 pm
by Freeman Keller
Buy him a contour duplicator and have him take several profiles - nut, 6th fret, 12th. Trace the profiles, scan and e-mail to you. Then have him ship the duplicator to you - I use mine all the time
https://www.walmart.com/ip/ABN-Contour- ... 3=&veh=sem
I would also have him take a couple of depth and width measurements with calipers if he has them - same places