Arm bevel

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
Doug Shaker
Posts: 278
Joined: Sat Jan 07, 2012 9:21 pm
Location: Palo Alto, California

Arm bevel

Post by Doug Shaker »

Does anyone have pointers to a set of instructions on doing an arm bevel?
I have Kent Everett's DVD, but before I start to actually take action, I'd like to see what other approaches are out there.
-Doug Shaker
Doug Shaker
Posts: 278
Joined: Sat Jan 07, 2012 9:21 pm
Location: Palo Alto, California

Re: Arm bevel

Post by Doug Shaker »

Well, 17 days later, no reply. So I have assumed that there aren't any other pointers to be gathered. The Kent Everett DVD is pretty good.
It isn't that hard, really, using his method. So far, so good.
-Doug Shaker
User avatar
Barry Daniels
Posts: 3186
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: Arm bevel

Post by Barry Daniels »

Pictures?
MIMF Staff
Post Reply

Return to “Flat-Top Acoustic Guitars and Bass Guitars”