L-00 from Grellier's plans

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.

L-00 from Grellier's plans

Postby Bob Howell » Thu Oct 05, 2017 12:17 pm

PE_20170930144455.jpg
I followed the discussion on the plans Eric started last spring and printed them out. Choose the L-00 for some reason.
Moved the sound hole and x bracing up 1/2" to accomidate sh placement on sound board. Later saw series of YouTube videos on bracing and learned that might be a big change.

I used tendilions construction, as I enjoy it. Worked smoothly.

Then carved off the overhang.

Macacauba and curly Sitka spruce.
This is my 3rd build.
Attachments
PE_20171004105159.jpg
PE_20171001140357.jpg
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Bryan Bear » Thu Oct 05, 2017 1:51 pm

Looking good. I love the L-00 shape. Keep updating with your progress so we can see it all finished!
PMoMC

Take care of your feet and your feet will take care of you.
User avatar
Bryan Bear
 
Posts: 956
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: L-00 from Grellier's plans

Postby Bill Raymond » Fri Oct 06, 2017 12:33 am

I believe you mean "tentallones".
Bill Raymond
 
Posts: 306
Joined: Fri Jan 06, 2012 5:37 pm
Location: Red Bluff California

Re: L-00 from Grellier's plans

Postby Bob Howell » Fri Oct 06, 2017 11:21 am

PE_20171006095313.jpg
Thanks for spelling. Here is sound hole and top.
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Bob Francis » Sat Oct 07, 2017 8:23 pm

that is looking nice!
Bob Francis
 
Posts: 359
Joined: Wed Jan 11, 2012 6:28 pm

Re: L-00 from Grellier's plans

Postby Patrick DeGreve » Wed Oct 11, 2017 1:42 pm

Hi Bob, I built a L00 from the Grellier plans about 5 years ago. I live it. Yours is looking great. please keep posting your progress.
User avatar
Patrick DeGreve
 
Posts: 308
Joined: Mon Jan 09, 2012 2:19 pm

Re: L-00 from Grellier's plans

Postby Bob Howell » Mon Dec 18, 2017 2:52 pm

I've installed the bindings and perfling. I made them both and cut off with 1/16" Cerf table saw blade
Attachments
20171218_105620_000.jpg
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Bryan Bear » Mon Dec 18, 2017 3:37 pm

Looking good, nice progress. It is hard to tell form the picture, what kind of top purfling are you using?
PMoMC

Take care of your feet and your feet will take care of you.
User avatar
Bryan Bear
 
Posts: 956
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: L-00 from Grellier's plans

Postby Bob Howell » Mon Dec 18, 2017 10:18 pm

I made one from a bunch of maple sliced off about 1/16-1/8 and various shades of brown, walnut, canary wood, santos rose wood and cherry veneer. Repeat every 2". Sliced off 1/32" with bs and glued up between VERY thin mahogany veneer, dyed black. Square, not angled. Worked out to be 5/64" wide. I have done several of these and am amazed what I can do successfully.
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Bob Howell » Tue Dec 19, 2017 9:58 am

Here are some of the perfling and materials I used to make them
Next sound board is shown. Another l-00.
Attachments
20171208_094829_000.jpg
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Jason Rodgers » Thu Dec 21, 2017 6:01 am

Looking good! That back and side wood is going to be beautiful under finish. Please give some closeups of your rosette and binding/perf scheme.

Back to your original post: why was it you shifted the soundhole and bracing? Will you do the same on the next, or follow the plans directly?
-Ruining perfectly good wood, one day at a time.
Jason Rodgers
 
Posts: 1553
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: L-00 from Grellier's plans

Postby Eric Knapp » Thu Dec 21, 2017 9:31 am

This is looking really nice and is inspiring me to get back on my OM. I stopped working on it during the school year as this is a hard one for me. The good news is I will be retiring in May. I’m looking forward to my new life with more shop time.

Thanks,

-Eric
User avatar
Eric Knapp
 
Posts: 393
Joined: Mon May 02, 2016 2:01 pm
Location: Wisconsin, USA

Re: L-00 from Grellier's plans

Postby Bob Howell » Mon Jan 01, 2018 9:59 pm

Here are more pictures. The bindings are cherry and neck will be also. The rosette is Cherry, maple, walnut, manzetta burls with holly, cherry, and black veneer mixed in. I went for random arrangement rather than symmetry.
Back strip is More of same sandwich cut 1/8" thick with cocobolo block and same veneers. Lots of cleanup remaining. Several binding repairs to make. Used HHG and have little model airplane covering iron to heat and fix.
Attachments
PE_20180101195611.jpg
PE_20180101194428.jpg
PE_20180101194312.jpg
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Bob Howell » Mon Jan 01, 2018 10:11 pm

I had installed the rosette located according to another set of plans, but when I traced out the location of the bracing I realized the sound hole must be 1/2" closer to neck. I think I moved the x brace 1/4" also and made it a 90 degree joint. Saw a youtube short that said that moving x brace 1/2" is BIG deal??? I don't know.
Bob Howell
 
Posts: 175
Joined: Sun Jan 08, 2012 4:23 am
Location: Atlanta, GA

Re: L-00 from Grellier's plans

Postby Beate Ritzert » Tue Jan 02, 2018 7:18 am

Wow. She's going to become really pretty.
User avatar
Beate Ritzert
 
Posts: 438
Joined: Thu Aug 02, 2012 8:20 am
Location: Germany

Re: L-00 from Grellier's plans

Postby Bryan Bear » Tue Jan 02, 2018 10:40 am

I like that back strap!

Moving the X or changing the angel can be a big deal inasmuch as it will alter the tone, but it will still sound like a guitar (just a different guitar than it would if you hadn't made the change). As long as the lower legs of the X catch the bridge, you should be fine structurally. You'll have to make some more guitars before you can start to know how bracing changes will shape your tone.
PMoMC

Take care of your feet and your feet will take care of you.
User avatar
Bryan Bear
 
Posts: 956
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO


Return to Flat-Top Acoustic Guitars and Bass Guitars

Who is online

Users browsing this forum: No registered users and 4 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links • 
cron