Neck profile on a Guild F50

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
Doug Shaker
Posts: 278
Joined: Sat Jan 07, 2012 9:21 pm
Location: Palo Alto, California

Neck profile on a Guild F50

Post by Doug Shaker »

I am making a guitar for a friend and the guitar that he currently uses is a Guild F50R. I'd like to duplicate the neck profile as much as possible, but his guitar is 75 miles North of me. Does anyone know of an on-line resource that might have detailed neck profile measurements?
-Doug Shaker
Freeman Keller
Posts: 494
Joined: Mon Feb 27, 2012 11:34 am

Re: Neck profile on a Guild F50

Post by Freeman Keller »

Buy him a contour duplicator and have him take several profiles - nut, 6th fret, 12th. Trace the profiles, scan and e-mail to you. Then have him ship the duplicator to you - I use mine all the time

https://www.walmart.com/ip/ABN-Contour- ... 3=&veh=sem

I would also have him take a couple of depth and width measurements with calipers if he has them - same places
Post Reply

Return to “Flat-Top Acoustic Guitars and Bass Guitars”