StewMac tools

Whammybar for a vintage Teisco/Kawai

Registered members, you may place your commercial ads here (there are no longer any fees for this). The MIMF plans are here. And the occasional "help wanted".
Forum rules
Either ad may include your logo and a link to your website if you have one.

Whammybar for a vintage Teisco/Kawai

Postby Christian Sæløen » Sat Apr 25, 2015 7:52 am

Hi!

(For everyones information; I'm new to this forum, and my English might not always be that good)

I just got a hold of an old Kawai - appearantly from the 60's, and I'm trying to bring it back to life!

At the moment I am experiencing problems with the electronics, whereas I almost cannot connect the guitar to an amp before it starts to squeal and feed. I will try to get this sorted out by just delivering the guitar to the local musicshop, and have them take a look at it.
Other than this - I am trying really hard to get a hold of an original whammybar for this guitar, and as far as I've seen it is supposed to be this one: http://i.ebayimg.com/00/s/MTU1OVgxNjAw/z/bD4AAOSwxH1UGwtQ/$_58.JPG

Does anyone at all have any idea of where I can get a hold of this kind of whammybar relatively quickly?

(Also I am not sure if this is the right place to post this)
Christian Sæløen
 
Posts: 1
Joined: Sat Apr 25, 2015 5:05 am

Re: Whammybar for a vintage Teisco/Kawai

Postby Jack Diab » Tue May 12, 2015 10:52 pm

Hi. That is certainly a unique guitar and an uncommon whammy-bar! The guitar looks very nice and I hope it works out.
To find a whammy-bar like that you might want to try a local custom shop where you can design your own. A website you might try is http://www.rtoguitars.com.
I don't know if this is what you're looking for or if you've already seen it but also found this http://www.ebay.com/itm/like/2618826496 ... =82&chn=ps.
Let me know how it turns out, Good Luck!
Jack Diab
 
Posts: 8
Joined: Thu Apr 30, 2015 9:28 pm
Location: Ashland Oregon

Re: Whammybar for a vintage Teisco/Kawai

Postby David King » Wed May 13, 2015 12:28 pm

Look up this Fender Part number: Fender Jazzmaster Trem Assembly 0076232000 . Replacing the bridge may seem extreme but it would allow you to use a standard threaded arm.
David King
 
Posts: 2305
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR


Return to Builders' Supplies and Services

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •