Wood colour

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.

Wood colour

Postby Jim Ashby » Fri Nov 17, 2017 2:03 pm

Hi All
I'm the proud owner of an Avante AV2-E baritone that I bought second-hand. The previous owner had put stickers on the soundboard which I'd like to remove but...the colour of the wood underneath the stickers is significantly lighter than the rest of the wood. Is there anything I can do (short of stripping the finish and sanding back) to get an even colour overall?
Any and all suggestions gratefully received.

Over to you!
Jim Ashby
Posts: 33
Joined: Fri Jan 06, 2012 1:26 pm
Location: Coventry UK

Re: Wood colour

Postby Barry Daniels » Fri Nov 17, 2017 2:13 pm

Set it in a sunny location for a few days, or weeks. The sun will turn the light color closer to the shade of the unprotected areas.
MIMF Staff
Barry Daniels
Posts: 2019
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Return to Glues and Finishes

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •