I just finished level-sanding the nitro clearcoats on the body of my first build, and have revealed a few spots that need to be drop-filled.
Am I correct that I will need to allow these fills to COMPLETELY cure before scraping or sanding them flush?
Thanks.
Drop-fill question
- Steve Sawyer
- Posts: 965
- Joined: Wed Jan 02, 2013 2:20 pm
- Location: Detroit, Michigan
Drop-fill question
==Steve==
- Barry Daniels
- Posts: 3186
- Joined: Thu Jan 05, 2012 10:58 am
- Location: The Woodlands, Texas
Re: Drop-fill question
If you have time, let them cure for a couple of weeks at a minimum. Otherwise you will have some shrinkage which will show in the finish.
MIMF Staff
- Steve Sawyer
- Posts: 965
- Joined: Wed Jan 02, 2013 2:20 pm
- Location: Detroit, Michigan
Re: Drop-fill question
That's what I was thinking.Barry Daniels wrote:Otherwise you will have some shrinkage which will show in the finish.
Thanks, Barry.
==Steve==