Water Based Opaque Colors

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.

Water Based Opaque Colors

Postby Andrew McSpadden » Sun Nov 11, 2018 6:07 pm

I am using General Finishes Enduro Var and learned it does not work well with water based pigments. Someone at GF said that the Clear Poly would play well with pigments. Anybody have any advise?

What are you recommendations for Pigment brands that work well with water based finishes? Looking specifically for Pelham Blue but need a brand(s) that have good color variety.

Thanks!
Andrew McSpadden
 
Posts: 33
Joined: Wed Jan 02, 2013 4:28 pm

Re: Water Based Opaque Colors

Postby Gordon Bellerose » Fri Nov 16, 2018 6:32 pm

I have used water based finishes only. I do not have any experience with solvent based finishes.
I use Stewmac's Colortone pigments with good results. It is a matter of mixing the right colors to get what you want.

I have used Target EM-6000, and Britetone water based lacquers.
I have not used GF Endurovar, so I can't speak to that.
I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
 
Posts: 1097
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: Water Based Opaque Colors

Postby David King » Sat Nov 17, 2018 4:01 pm

For an opaque color (other than white and black which are potentially available from GF) you may as well find a compatible paint as an undercoat rather than trying to add pigment to the varnish. Pigments are available as a dry powder and can be picked up at art stores and mixed into any binder. They shouldn't care too much what that binder's composition is. If you have a Dick Blick store nearby that might be handy. If you want something very specific then Kramer is your go to source: https://www.kremer-pigmente.com/de (click on the British flag for an english version of the site). I think they ship out of NYC for domestic orders.
David King
 
Posts: 2446
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR


Return to Glues and Finishes

Who is online

Users browsing this forum: No registered users and 6 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links • 
cron