StewMac tools

Benchtop Drill Press Recommendations

Questions about tools and jigs you want to buy/build/modify.

Benchtop Drill Press Recommendations

Postby Jason Rodgers » Sat Oct 14, 2017 9:09 pm

Hi, folks. I'm doing some tool upgrades and I need some recommendations for a good benchtop drill press. I have a 17" pedestal Jet, and it's great, but I can do with a smaller unit.

As for requirements, I do most of the usual electric guitar builder things on the drill press: accurate holes, hogging pickup and neck pockets with forstners, etc. All of my spindle sanding is done on the OSS, but I do use a Safe-T-Planer and a disc sander, so rpms up to or over 3000 is necessary. No need for the variable speed fanciness. I like a spindle lock/depth stop, but lasers aren't necessary.

I'm thinking a 12" model with a .5hp motor will work fine. Who makes a solid unit with tight tolerances and few bells and whistles?

Thanks!
-Ruining perfectly good wood, one day at a time.
Jason Rodgers
 
Posts: 1543
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: Benchtop Drill Press Recommendations

Postby David King » Mon Oct 16, 2017 2:23 pm

Jason,
you'll probably get what you pay for on the new end of the spectrum but if you have time and patience you might look for a used Walker Turner or equivalent. The other cool drill press of a more recent vintage would be the Ryobi WDP1850.
David King
 
Posts: 2302
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR


Return to Tools and Jigs

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •