Stew Mac jacks

Questions about tools and jigs you want to buy/build/modify.

Stew Mac jacks

Postby Greg Steil » Mon Jun 16, 2014 7:53 pm

To do a repair on a Tacoma "Thunderchief" Acoustic Bass(posted in repairs) I made a couple gimmicks to help. V blocks to align with braces, mounted loosly with a 6-32 screw Also I made a "solid" tool to raise and lower the jack. I used a piece of brass tubing with an Allen Head cap screw, glued in one end, and an Allen wrench in the other end. Worked great.
Greg Steil
Posts: 151
Joined: Sat Jan 07, 2012 7:54 pm

Return to Tools and Jigs

Who is online

Users browsing this forum: No registered users and 4 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •