Bandsaw blade?

Questions about tools and jigs you want to buy/build/modify.
Post Reply
User avatar
John Meyers
Posts: 66
Joined: Fri Feb 10, 2012 5:35 pm

Bandsaw blade?

Post by John Meyers »

I broke my bandsaw blade and would like to know, what do you think is the best blade type for cutting solid body guitars and necks? No ripping just profiles. I would love a blade that I can cut out a body without much relief cuts, one that will stay on the line.
I don't make mistakes, I make adjustments!
User avatar
Mark Swanson
Posts: 1991
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: Bankdsaw blade?

Post by Mark Swanson »

Hello and welcome to the MIMForum. Please know that we require full first and last names here, and no handles or knicknames. Please let us know your real name and we'll change that for you.
  • Mark Swanson, guitarist, MIMForum Staff
Max Debelleix
Posts: 21
Joined: Mon Feb 13, 2012 8:00 am
Location: France

Re: Bankdsaw blade?

Post by Max Debelleix »

1/4 or 1/2 inch blade, and a very good set of guides, a good bandsaw too! Otherwise you'll struggle forever.
User avatar
John Meyers
Posts: 66
Joined: Fri Feb 10, 2012 5:35 pm

Re: Bandsaw blade?

Post by John Meyers »

Mark my name is John Meyers. This new forum caused me to start over from scratch with you. I been a member for years now.

Max, thanks for the info.
I don't make mistakes, I make adjustments!
User avatar
Greg Robinson
Posts: 686
Joined: Fri Jan 06, 2012 1:54 pm
Location: Coburg North, Victoria, Australia

Re: Bandsaw blade?

Post by Greg Robinson »

Thanks John, your username has been updated.
MIMForum staff member - Melbourne, Australia
User avatar
Mark Swanson
Posts: 1991
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: Bandsaw blade?

Post by Mark Swanson »

There you go John! Thank you.
  • Mark Swanson, guitarist, MIMForum Staff
User avatar
John Meyers
Posts: 66
Joined: Fri Feb 10, 2012 5:35 pm

Re: Bandsaw blade?

Post by John Meyers »

What do you think TPI should be 4 or 10?
I don't make mistakes, I make adjustments!
User avatar
Charlie Schultz
Site Admin
Posts: 1426
Joined: Fri Dec 23, 2011 6:53 pm
Location: St. Louis, MO

Re: Bandsaw blade?

Post by Charlie Schultz »

A 1/4" blade will allow for tighter turns (fewer relief cuts) compared to the 1/2" blade. The 4 TPI will leave a little rougher surface than the 10 TPI but is probably better suited for the thicker wood used in solid bodies.
Rodger Knox
Posts: 497
Joined: Mon Jan 09, 2012 2:02 pm
Location: Baltimore, Maryland

Re: Bandsaw blade?

Post by Rodger Knox »

First off, how big is your bandsaw? Anything less than 14" will be problematic for hard solidbody woods, the smaller saws just don't cut that good.
I have a small 3 wheel bandsaw, and it can be used to cut out solidbodies, but the tension is too low, the guides are too loose, and the blade is too flexible to really follow a line.
As far as TPI, the "rule fo thumb" is at least 3 teeth in the cut, so 4 TPI is good down to 3/4" thickness, and would be appropriate for up to 3"or4". Generally speaking, the more TPI, the smoother the cut, and the smaller the blade, the tighter the curve it will cut. I'm currently using a 1/4" Timberwolf with 6 or 8 TPI in my 14" saw to cut out solid bodies, and am quite satisfied with it.
A man hears what he wants to hear, and disreguards the rest. Paul Simon
Post Reply

Return to “Tools and Jigs”