Page 1 of 1

Looking for replacement nickel guitar case feet/studs

PostPosted: Fri Aug 18, 2017 6:10 pm
by Allan Kaplan
The good folks at Stew-Mac told me that if anyone could help me out, it would be the users at MIMF:

I'm looking for a replacement nickel guitar case feet/studs for a plastic Fender case, as one has been knocked off. These are the domed feet with a split-rivet type of fastening, measuring about 13/16" diameter with the dome about 1/4" tall. I have found some the same diameter, but not this height; all others are much taller.

I've checked with Ohio Travel Bag, eBay, and combed the interwebs, and haven't had luck.

Any suggestions for a source would be greatly appreciated.

Thanks!

Re: Looking for replacement nickel guitar case feet/studs

PostPosted: Fri Aug 18, 2017 6:30 pm
by Bob Gramann
You might check with Fender. If TKL makes their cases, TKL will have the replacement parts.