StewMac tools

Looking for replacement nickel guitar case feet/studs

Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.

Looking for replacement nickel guitar case feet/studs

Postby Allan Kaplan » Fri Aug 18, 2017 6:10 pm

The good folks at Stew-Mac told me that if anyone could help me out, it would be the users at MIMF:

I'm looking for a replacement nickel guitar case feet/studs for a plastic Fender case, as one has been knocked off. These are the domed feet with a split-rivet type of fastening, measuring about 13/16" diameter with the dome about 1/4" tall. I have found some the same diameter, but not this height; all others are much taller.

I've checked with Ohio Travel Bag, eBay, and combed the interwebs, and haven't had luck.

Any suggestions for a source would be greatly appreciated.

Thanks!
Allan Kaplan
 
Posts: 1
Joined: Mon Aug 14, 2017 9:10 pm

Re: Looking for replacement nickel guitar case feet/studs

Postby Bob Gramann » Fri Aug 18, 2017 6:30 pm

You might check with Fender. If TKL makes their cases, TKL will have the replacement parts.
User avatar
Bob Gramann
 
Posts: 696
Joined: Fri Jan 06, 2012 11:08 am
Location: Fredericksburg, VA


Return to Wood and Materials Q&A

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •