Fender Acoustasonic 90 repair

Pickups, magnets, microphones, amps, speakers, cabs, whatever...
Post Reply
Paul Kincaid
Posts: 37
Joined: Wed May 23, 2012 11:42 am

Fender Acoustasonic 90 repair

Post by Paul Kincaid »

I have a partially working Acoustasonic 90 that I am having a difficult time finding information about. It has no volume or noise from either of the channel inputs, but the aux input on the back works fine. I have cleaned and re-seated the ribbon cables connecting the circuit boards together and done a visual inspection without finding any obviously bad parts or bad/broken solder joints. I think I could narrow down the search dramatically with a proper schematic, but I can't find one anywhere. Any help would be appreciated. Thanks!
Bob Francis
Posts: 582
Joined: Wed Jan 11, 2012 6:28 pm

Re: Fender Acoustasonic 90 repair

Post by Bob Francis »

manualslib.com has a acoustisonic jr on-line.
I was hesitant to link directly.
User avatar
Alan Peterson
Posts: 127
Joined: Sat Jan 07, 2012 5:32 pm
Location: Washington DC USA

Re: Fender Acoustasonic 90 repair

Post by Alan Peterson »

I don't have a schematic either, but I might suspect either no power going to the preamp circuit board associated with the front panel controls; or perhaps a onetime overvolt condition to that board which baked the op amps.
Time for the meter.
Alan Peterson
Name in Anagram Form: "Resonant Peal"
Post Reply

Return to “Electronics”