mini 5pin connectors for swapping pickups

Pickups, magnets, microphones, amps, speakers, cabs, whatever...
Post Reply
Greg Martin
Posts: 308
Joined: Thu Feb 23, 2012 7:18 pm

mini 5pin connectors for swapping pickups

Post by Greg Martin »

Im going to wind some pickups as soon as it warms up,and would like to find some mini 3 or 5 pin connectors that would allow me to swap out test pickups with out repeated soldering during testing.i had though about deans connectors but maybe there are others??
David King
Posts: 2690
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR
Contact:

Re: mini 5pin connectors for swapping pickups

Post by David King »

EMG uses AMP connectors and those are widely available from places like Mouser and Digikey. I think you want the .1" pitch if you want to match up to the EMG's wiring harnesses. Other companies make more or less compatible connectors.
User avatar
Dan Smith
Posts: 346
Joined: Mon May 18, 2015 9:33 pm
Location: Texas

Re: mini 5pin connectors for swapping pickups

Post by Dan Smith »

David King wrote:EMG uses AMP connectors and those are widely available from places like Mouser and Digikey. I think you want the .1" pitch if you want to match up to the EMG's wiring harnesses. Other companies make more or less compatible connectors.
Molex are good too.
Ever-body was kung fu fight-in,
Them kids was fast as light-nin.
Post Reply

Return to “Electronics”