StewMac tools

Ibanez part

Pickups, magnets, microphones, amps, speakers, cabs, whatever...

Ibanez part

Postby Cato Finsas » Thu Jan 12, 2017 7:24 am

Hi
Any body know where I can get hold of this part?

4PT00A0037

It is to a Ibanez PS120
Attachments
ibanez_ps120.png
ibanez_ps120.png (51.44 KiB) Viewed 725 times
ibanez_ps120.png
ibanez_ps120.png (51.44 KiB) Viewed 725 times
Cato Finsas
 
Posts: 3
Joined: Thu Jan 12, 2017 3:45 am

Re: Ibanez part

Postby JC Whitney » Thu Jan 12, 2017 10:02 am

Hi Cato. Are you willing/able to fabricate the new one yourself? If so, look for pickguard stock at stewmac.com or any other place that sells guitar repair materials. Google search for videos on how to make a new truss rod cover. The shape of this one is tricky, but take your time. If you buy a sheet of pickguard material you'll have enough to experiment first and make a few mistakes. Carefully trace the old one onto your new material and then cut/file/sand it out to match. If the sides are beveled, you can do that with a small router bit if your skills and available tools are up to the task. If not, just take it slow and steady by hand. Make sure your new mounting holes are aligned just right, and you'll be in business. If you don't have the original to trace, use those photos, the existing hole locations, and a copy machine to make a pattern.
Whose signature is that?
Last edited by JC Whitney on Thu Jan 12, 2017 10:06 am, edited 1 time in total.
JC Whitney
 
Posts: 106
Joined: Mon Jan 09, 2012 1:19 am

Re: Ibanez part

Postby Cato Finsas » Thu Jan 12, 2017 10:04 am

thanks - it is Paul Stanley`s signature.
Cato Finsas
 
Posts: 3
Joined: Thu Jan 12, 2017 3:45 am

Re: Ibanez part

Postby JC Whitney » Thu Jan 12, 2017 11:49 am

That explains the PS then, and I think that also means that coverplate is mirrored. That makes this even more fun. Maybe consider swapping out to an all black cover if you're not too concerned about keeping it "original"?
JC Whitney
 
Posts: 106
Joined: Mon Jan 09, 2012 1:19 am

Re: Ibanez part

Postby JC Whitney » Thu Jan 12, 2017 11:54 am

Ha! Turns out that guitarfetish and a bunch of other places sell mirrored acrylic pickguard stock. Who knew?
JC Whitney
 
Posts: 106
Joined: Mon Jan 09, 2012 1:19 am

Re: Ibanez part

Postby Cato Finsas » Thu Jan 12, 2017 12:08 pm

I want some
Cato Finsas
 
Posts: 3
Joined: Thu Jan 12, 2017 3:45 am

Re: Ibanez part

Postby David King » Sat Jan 14, 2017 5:06 pm

This place sells ibanez and a lot of other truss rod covers...
http://www.reproguitarparts.com/#!/Iban ... ry=1370956
David King
 
Posts: 2294
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR


Return to Electronics

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •