conversion job - 6 string acoustic

Pickups, magnets, microphones, amps, speakers, cabs, whatever...
Post Reply
MVTL33
Posts: 1
Joined: Sun Mar 04, 2012 12:36 pm

conversion job - 6 string acoustic

Post by MVTL33 »

I have a nicely set up Squier Acoustic with a few mods. Now I am making it electro-acoustic.
I must also mention I am doing this on an extreme budget. (i.e. as and when I have a couple of quid).

What I am using:
Squier Acoustic, 6 string
Washburn EQ300 pre-amp
Schaller acoustic pickup
Type 042SH single hub 1/4" jack socket

My problem is:
Not sure about the wiring route I should take; not a great deal online can be found on this subject.

I would have preferred to throw money at it, but I am also liking the challenge.

Any help would be appreciated. Thanks. -Mutlee 8-)
User avatar
Mark Swanson
Posts: 1991
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: conversion job - 6 string acoustic

Post by Mark Swanson »

Hello and welcome to the MIMForum. Please remember that we require the use of full names here, first and last. If you'd tell me or one of the Staff your name we'll fix that for you. Thanks!
  • Mark Swanson, guitarist, MIMForum Staff
Post Reply

Return to “Electronics”