Search found 69 matches

by David Schwab
Mon Aug 06, 2018 2:36 pm
Forum: Electronics
Topic: Humbucker base plates
Replies: 2
Views: 6386

Re: Humbucker base plates

I use baseplates without legs.
by David Schwab
Thu Mar 30, 2017 12:38 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: The Hossenfeffer Bass
Replies: 69
Views: 97903

Re: The Hossenfeffer Bass

That looks great! I own two '73 4001 basses. One was my first good bass I got new at age 15. I was a big Yes and McCartney fan. I made an aluminum nut for my Rick.
by David Schwab
Thu Mar 30, 2017 10:59 am
Forum: Electronics
Topic: Which Pot for Active EMG?
Replies: 9
Views: 20399

Re: Which Pot for Active EMG?

I have found that the older EMG pickups (not the X series) actually sound better with 100k pots. They had more presence. The reason is that the output impedance of the original series of pickups is a bit on the high side (about 150k). So you get less loading with the higher value pot. On a passive i...
by David Schwab
Thu Apr 07, 2016 1:43 pm
Forum: Electronics
Topic: how to mix graphite powder to get shielding paint
Replies: 14
Views: 23260

Re: how to mix graphite powder to get shielding paint

the best thing to do as a graphite expert is to use a mixture of isopropyl alcohol and graphite powder (be sure the powder is truly powder) spray this on and then follow that after it dries with a coat of shellac thinned a bit with denatured,they both use the same airborne finish to dry.must be spr...
by David Schwab
Tue May 13, 2014 1:18 pm
Forum: Electronics
Topic: Noobish Confusion on Shielding
Replies: 7
Views: 6556

Re: Noobish Confusion on Shielding

You do not need to shield the pickup cavities, as these pickups are internally shielded. But since you did add foil, just make sure it's all grounded.
by David Schwab
Tue May 13, 2014 1:09 pm
Forum: Electronics
Topic: repotting pickups with pure beeswax?
Replies: 8
Views: 8804

Re: repotting pickups with pure beeswax?

You don't need bees wax at all. I use straight paraffin.
by David Schwab
Sun Mar 17, 2013 1:39 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Pete Halliday's Latest Noisemakers
Replies: 31
Views: 18018

Re: Pete Halliday's Latest Noisemakers

I had never seen the Marauder before. That's interesting that Gibson was also making something that was kind of Tele-ish. Do you know what the scale length was on those? It was a Bill Lawrence design. It looks like a flat top Les Paul, same as gthe L6-S and Sonex, with a maple or rosewood fingerboa...
by David Schwab
Sun Mar 17, 2013 1:26 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Odd Gstring sounds
Replies: 3
Views: 3414

Re: Odd Gstring sounds

How high are the saddles set on the bridge? I used to use those, and one problem is if the saddles are not high enough, the string buzzes on the roller, and sometimes pops out. Schaller supplies spacers with the bridges, but I've never found a reason to use them. They often put the bridge too high, ...
by David Schwab
Sun Mar 17, 2013 1:24 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Guitar tuned in fifths research
Replies: 15
Views: 10975

Re: Guitar tuned in fifths research

I'm familiar with Fripps tuning (NST). I've wondered why he is exploring different tunings one the one hand, put kept on using a standard guitar (with parallel frets) on the other, but maybe he just didn't came across the multi-scale concept (although it has his history). Well Fripp came up with th...
by David Schwab
Sat Feb 23, 2013 11:12 pm
Forum: Electronics
Topic: vari tone in a box
Replies: 11
Views: 12260

Re: vari tone in a box

Varitone circuits are notch filters that cut out the midrange. If you remove the inductor, then they are decade controls that cut out the high frequencies. Some instruments, like the L6-S guitar and L9-S Ripper bass, used a potentiometer as a midrange control, instead of the rotary switch with the a...
by David Schwab
Sun Feb 10, 2013 1:54 am
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Fabric covering on a guitar
Replies: 9
Views: 8036

Re: Fabric covering on a guitar

I am sure this was produced by Ellie Erickson. Go to the Board index/MIMF library/ put Ellie Erickson's baritone lap steel guitar into the search engine, and hopefully you will find what you need. http://www.mimf.com/old-lib/erickson_lapsteel.htm I can't seem to get the picture to show however. The...
by David Schwab
Wed Feb 06, 2013 11:20 am
Forum: Electronics
Topic: hand wound pickup question
Replies: 9
Views: 10696

Re: hand wound pickup question

Okay. when i peeled wire coating off of coil harness i found that the wires for coil tap had touched against the shielding copper. That's why I figured blown. So I removed the shielded wire bundle down to just the 4 short wires coming out of the coil, I tested there. 1 showed continuity. Nothing on...
by David Schwab
Wed Feb 06, 2013 11:11 am
Forum: Electronics
Topic: New (approx) 1 watt amp
Replies: 20
Views: 20194

Re: New (approx) 1 watt amp

And roadies with back injuries! A 100W amp is only 4 times as loud as a 1W, using the same speakers. And most cheaper instrument speakers have poor efficiency. A nice 30W guitar speaker with 113dB 1W/1m with a 1W amp is plenty gigging loud! Only if all you want is distortion! I have a nice little V...
by David Schwab
Wed Feb 06, 2013 11:07 am
Forum: Electronics
Topic: Alembic P-Bass pickup w/ no preamp
Replies: 9
Views: 12221

Re: Alembic P-Bass pickup w/ no preamp

David King wrote:Sometimes it pays to have a business license.
Well that's true for many guitar parts, but does 't help the OP, unless you want to get him a preamp cheap. :)
by David Schwab
Wed Feb 06, 2013 11:04 am
Forum: Electronics
Topic: how do they construct a hum canceled p-90?
Replies: 9
Views: 11860

Re: how do they construct a hum canceled p-90?

The Frailin pickups are sidewinders, like the old Lawrence L-250s. In a sidewinder the two coils lay on their side with the tops facing the keeper/pole pieces. This way there is a single point in which the pickup samples the string, and it sounds like a single coil. They are a little less efficient,...
by David Schwab
Mon Jan 07, 2013 1:16 am
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Paul Rhoney's Latest Builds
Replies: 82
Views: 78357

Re: Paul Rhoney's Latest Builds

I love your guitars! I have to add you to the list of instruments I'm going to buy when I get rich. :)
by David Schwab
Mon Jan 07, 2013 12:49 am
Forum: Electronics
Topic: Alembic P-Bass pickup w/ no preamp
Replies: 9
Views: 12221

Re: Alembic P-Bass pickup w/ no preamp

David King wrote:Well I hope no one has to pay retail on the Series I & II outfits.
I got that price reading their forum where people were asking Mica how much it would be to retro fit their bass to Series I or II electronics! That was the answer.
by David Schwab
Sat Dec 29, 2012 2:45 pm
Forum: Electronics
Topic: Alembic P-Bass pickup w/ no preamp
Replies: 9
Views: 12221

Re: Alembic P-Bass pickup w/ no preamp

I still think even the bass/treble preamp for the Activators is going to be way over priced. Oh and the Series I and II electronics are like $3,000. The Activator preamp is one op amp and a few other parts. This is the low pass filter module. http://www.sgd-lutherie.com/images/Alembic_Activator_prea...
by David Schwab
Wed Dec 26, 2012 10:49 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Mario Labonte's Jazz bass build
Replies: 13
Views: 10286

Re: Mario Labonte's Jazz bass build

Are those deeply notched bridges part of the design of the bridge? That's a Badass I bridge. It was intended for Gibson basses so it's very high. The notches should not be cut that deep! Half of the string's diameter is the general rule. The Badass II bridge is made for Fenders and is a lower profi...

Go to advanced search